06/27/2016 | Webnews

LEWA at 7th city run in Leonberg

On June 26, 2016 at 20:20 o´clock, the 7th city run in Leonberg took place. As a sponsor for the 5,000 meter run and with an own team, LEWA was again right up there. This year the record of number of participants has been exceeded again. 1260 adults, adolescents and children ran through the city of Leonberg. In comparison with the last year there were 209 more runners. From LEWA 22 runners started. 11 runners participated in the 5,000 meter run and 11 employees ran for the 10,000 meter run. At the end, the competitors were strong and LEWA employees gained in the general classification...
Read more


05/17/2016 | Webnews

Corrosion protection for pumps: LEWA uses Frosio certified coating inspectors

The requirements for corrosion protection are constantly increasing. For this reason, paint specifications according to NORSOK (Frosio, Nace) from customers in the oil & gas, refining and chemicals are becoming more extensive and stringent. Highly qualified staff to carry out the inspection work is therefore very important. LEWA responds to these requirements and has had three employees to eligible Frosio inspectors trained. Frosio is known worldwide as Norwegian Advisory Board for training and certification of coating inspectors. The Frosio certification is an important step to obtain an...
Read more


05/03/2016 | Pressrelease

Minimum life cycle costs: Innovative metering pump with diaphragm monitoring helps to prevent production losses

Hermetically sealed pump head is suitable for any type of chemicals Operators have to meet strict safety and environmental regulations and at the same time ensure that the requirements of the corresponding processes are met when metering chemicals. This includes a high metering accuracy as well as the possibility of a customized configuration and highest possible flexibility in use. Since the expenses for unexpected operation downtimes make up on average 70 percent of the life cycle costs of a pump, it is important to make sure during the selection process that the pump is built reliably and...
Read more


04/14/2016 | Pressrelease

Trade show preview of Hannover Messe from April 25 to 29, 2016

Ecodos diaphragm metering pump: Economical and safe solution for pumping fluid in the low-pressure range In many industries, metering tasks take place in the low-pressure range of < 20 bar. Using a high-pressure pump for this purpose is usually not economical. At this year's Hannover Messe, Lewa GmbH is presenting a cutaway model of the Ecodos diaphragm metering pump, which clearly illustrates the operating principle of the low-pressure pump. The distinguishing feature  is that the Ecodos diaphragm is mechanically driven,rather than hydraulically driven. Lewas pump installation...
Read more


02/17/2016 | Webnews

LEWA achieves the treble: certificates for quality, work safety and environmental management

After LEWA has already been certified for quality management (ISO 9001) and occupational health and safety (OHSAS 18001: 2007) in recent years, LEWA now obtains a certificate for a successful environmental management system according to ISO 14001:2004. In an audit, proof has been furnished that LEWA complies with all requirements of the ISO standard. A certification document according to EMAS III will be issued. The Eco-Management and Audit Scheme (“EMAS”) has been developed by the European Community to support companies which want to improve their environmental performance. EMAS-certified...
Read more


02/02/2016 | Pressrelease

New Management team to lead Lewa-Nikkiso Industrial Division from Leonberg base

Since January 2016, a reformed management structure takes care of further economic growth at Lewa-Nikkiso Group and drives forward the integration of the newly arranged Industrial Division. This division consists of the LEWA group, Geveke NV, Nikkiso Cryo and the Nikkiso Japanese pump business activities. Since the start of 2013, the Pumps and System unit at Lewa Group has been headed up by Naota Shikano and Stefan Glasmeyer, responsible for Sales and Marketing, and Dr. Martin Fiedler, in charge of the Operations. “This step to form a strong division, reorganize the structure and align our...
Read more


11/23/2015 | Pressrelease

Remote Area Service: ALMA Observatory realizes autarkic power generation with LEWA pumps

At almost 3,000 m above sea level, robust multi-fuel pumps supply what is currently the world's largest ground-based astronomy project Extreme conditions in Chile's Atacama Desert place special demands on both technology and support In the northern reaches of Chile's Atacama Desert, 66 huge, high-precision antennas stand at 5,000 m above sea level, taking advantage of the clear, thin air at this altitude to obtain very sharp, high-contrast images of space. The system is part of the Atacama Large Millimeter/submillimeter Array (ALMA) Observatory in Chile, operated together by institutions...
Read more


10/31/2015 | Pressrelease

Single-dimension CFD simulation based on an instationary friction model enables precise dimensioning of pump piping systems

Single-dimension CFD simulation based on an instationary friction model enables precise dimensioning of pump piping systems Pump manufacturer Lewa is installing a test center for validation of simulation results obtained from their new proprietary software module A technical animation that visualizes the synchronization of three Triplex process diaphragm pumps in different operating states was one of the highlights at Lewa's booth at this year's ACHEMA show. The objective of this kind of simulation is to reduce pressure-induced pulsation and to prevent formation of pipe vibrations that are...
Read more


10/23/2015 | Pressrelease

Biggest Chemical Injection Package ever built by LEWA is finished

In order to meet a wide array of requirements, pump manufacturer and system integrator Lewa through their Singaporean subsidiary (LEWA-Nikkiso Singapore Pte. Ltd.) recently fabricated and installed Lewa’s largest chemical injection module ordered to-date, on a Brazilian FPSO off the coast of Singapore. With dimensions of 21.3 x 20 x 10 m and an estimated operating weight of 714 tons, the complete module surpasses the two others that the Lewa Group has produced for the EPC since 2010. Overall, 2,700 m of pipeline is installed in the module; it can be operated at a maximum pressure of 385 bar...
Read more


10/09/2015 | Webnews

Free Webinar: Twin-column Chromatography vs. 3-4 column Systems for the Purification of Biomolecules

Prof. Massimo Morbidelli will present peer reviewed data comparing 2 column vs. 3 and 4 column chromatography systems. Application examples of monoclonal antibody capture using the twin-column countercurrent CaptureSMB process and protein purification using a twin-column ion-exchange MCSGP process are examined. Session EU/Asia: 22 Oct. - 08:00 GMT; 09:00 CET; 17:00 Tokyohttps://join.onstreammedia.com/register/lewapt/multicolumn2 Session USA/EU: 22 Oct. - 08:00 PST; 11:00 EST; 16:00 GMT; 17:00 CEThttps://join.onstreammedia.com/register/lewapt/multicolumncomparison About the speaker:...
Read more


10/01/2015 | Pressrelease

Pre-announcement for GAT show (10/26 to 10/28/2015) in Essen, Germany

New touchscreen control for fully automated monitoring and regulation of odorizing systems In nearly all countries, continuous, proportional odorizing and monitoring is mandated by law for potentially hazardous or highly explosive gases with no natural odor. Lewa GmbH has developed a new Odor Control Unit (OCU) in order to fulfill this need efficiently and without requiring a major commitment of time and personnel. The system continuously compares the target and actual concentration of the odorant, so that regular inspections of the odorizing systems can be discontinued within four weeks, or...
Read more


09/11/2015 | Webnews

25 years of vocational training at LEWA

For 25 years, we train apprentices at LEWA. This is a reason to celebrate. Hence, LEWA invites you to the Open Day of our Apprentices Training department on September 26, 2015, from 10.00 until 16.00 at LEWA headquarters in Leonberg, Ulmer Straße. On the Open Day, students and parents have the possibility to get detailed insight into the occupations at LEWA. Supervisors and trainees are available the whole day to answer questions. Different stations provide additional views into the various qualified jobs and invite you to participate. Visitors can expect snacks, drinks, as well as a diverse...
Read more


07/14/2015 | Webnews

On the bike over the Swabian Alb: LEWA employees at "Albstadt Bike Marathon"

On Saturday, July 11, 2015, the "Albstadt Bike Marathon" took place on the Swabian Alb. Around 2,700 mountain bikers participated. 21 LEWA employees took part and were ready in the starting blocks at 10:00 am. Shortly before the marathon, the LEWA team prepared for the event enthusiastically: Already on Sunday, June 28, an all-day 80-kilometer bike tour through the northern Black Forest was organized by the LEWA employees. More than 1,400 meters of altitude had to be overcome. In addition, a smaller two-hour tour around Eberdingen took place, in which the team also prepared for the...
Read more


07/13/2015 | Webnews

LEWA launches new white paper portal

LEWA is a global technology leader in the field of diaphragm metering and process pumps as well as diverse systems for various applications. In more than 60 years of company history, we have acquired a comprehensive expertise, which enables us to develop the best solutions for many processes and applications for our customers. Our qualified engineers intensively research in various fields. We would like to share the results of this work with you. In our new white paper poral, we present the latest state of research and our expertise. Are you interested in the latest findings in the field of...
Read more


07/08/2015 | Pressrelease

High-precision ingredient metering for spreadable butter: Dairy giant Arla uses multiplex pumps with a broad adjustment range

Spreadable butter is one of the primary products of the Danish/Swedish dairy company Arla. At their facility in Gotene Arla is producing the brand Bregott for the domestic market in Sweden. To be able to reproduce the specific characteristics of the different types exactly, ingredients must be precisely metered. For ten years, the production facility in Gotene has used pumps from Lewa GmbH for this purpose, which are not only designed for high discharge pressures but also have an accuracy of ± 1 percent, meeting the manufacturer's strict requirements. From the different variants of the...
Read more