CO2 cooling with LEWA pumps

The major research facility CERN operates the world's biggest Large Hadron Collider (LHC). To obtain accurate measurements, silicon detectors are mounted close to the interaction point at all experiments. Carbon dioxide cooling systems cool the innermost layers of the detectors to temperatures of -40 ° C. LEWA diaphragm pumps have been used since 2007. They ensure the smooth flow and guarantee trouble-free operation. For the upgrade of the CMS pixel detector, a new CO2 cooling system was built with a LEWA remote head metering pump and put into operation. Unlike standard pumps they process the highly compressed CO2 without heat input.


CERN relies on LEWA diaphragm pumps because the detector cooling circuit must not be contaminated with oil. Oil hardens under the influence of radiation from and then congest the cooling lines. At least for CO2 a compression cycle is not possible because no oil-free compressor for CO2 is available on the market.

LEWA pumps deliver an absolutely uniform flow which is necessary for a continuous and constant, two-phase cooling. The transition of the CO2 from the liquid in the gaseous state is used in order to dissipate heat. An important advantage of CO2 cooling: Due to the compression, the volume of the vaporized CO2 is very low, and tubes with a very small diameter of only two millimeters tubes can be used.

Another CO2 cooling system has a total power of 15 kW. For this plant, LEWA diaphragm metering pumps in remote head design with a cooling jacket are in use. The transmission of the displacement motion is performed by the liquid column contained in the connecting line. Thus, the remote head design keeps critical conditions away from the displacement system. In addition, heating of the CO2 or cooling of the oil is prevented, which would lead to the formation of gas bubbles. If the requirements change, the flow rate can be adjusted via the remote stroke adjustment.

LEWA remote head metering pump for CO2-cooling in large hadron collider


LEWA remote head metering pump for CO2-cooling in large hadron collider

The European Organization for Nuclear Research, or CERN, founded in 1954, is dedicated to fundamental physical research. With approximately 2,500 employees from 22 member states, CERN is the world's largest particle physics research center. Currently more than 12,000 guest researchers from more than 100 countries conduct experiments in this large research center located in the Swiss canton of Geneva and in the French département of Ain.

Over the years, CERN has built several particle accelerators that accelerate various particles almost to the speed of light and make them collide. The organization commissioned its first particle accelerator, the Synchrocyclotron (SC), in 1957.

The Large Hadron Collider came into operation in 2008 and is currently the most important accelerator at CERN. By examining the trajectory of the particles, the results of decay, and the interactions between the particles, researchers can draw conclusions about the nature of matter and the origins of the universe. Due to the enormous technical effort required to create and operate the systems, CERN is operated and financed internationally.

Photos © CERN (2)


LEWA solutions are found also in other industries, for example in the Varnish- and Lacquer industry
LEWA solutions are found also in other industries

Pumps and Metering Systems for Other Industries

LEWA offers customized solutions and references for almost all industries in which processes require exact metering or the reliable conveyance of fluids. As specialists in fluid handling, we of course also have experience in areas outside of our key markets.

More Details


LEWA ecoflow diaphragm metering pump all around talent

LEWA ecoflow® diaphragm metering pump

LEWA ecoflow is the innovative and universal metering pump with DPS diaphragm protection system in a tried-and-tested modular system. Suitable for numerous applications, the ecoflow is our real all-around talent, relied on by customers from all industries.

More Details
LEWA intellidrive diaphragm metering pump

LEWA intellidrive® diaphragm metering pump

Design the suction and discharge strokes of the metering pump to meet your specific requirements! With LEWA intellidrive technology, you can model pumping characteristics individually.

More Details
LEWA micrometering pumps

LEWA MAH, MBH, MLM Micro-metering pumps

Metering pumps for very small flow rates. An especially cost-effective solution when fluid components must be metered proportionally to a variable reference value.

More Details
LEWA FC laboratory pumps

LEWA FC laboratory pumps

Metering pumps for very small flow rates. The FC micro-metering pumps for pressures up to 400 bar were developed specifically for laboratories and test centers.

More Details

Keep in touch with us

Get insights into our products and applications for liquid metering. You will also receive all the latest news about LEWA as well as invitations to our exclusive events.

Captcha image

Social Media

LEWA is on LinkedinLEWA is on YouTubeLEWA is on Instagram
©2024 LEWA GmbH  Terms & Conditions Privacy Imprint